CALL NOW: (918) 994-7776

Considering Reshoring?

Click HERE to learn more!

100 Years

Of Experience

CALL NOW: (918) 994-7776

Considering Reshoring?

Click HERE to learn more!

100 Years

Of Experience

FLUOROLON NYLON 5651

DOWNLOAD MATERIAL SPEC SHEET

Nylon 5651, Fluorolon fiber composite, is especially suited for high load/high rpm bearing applications, also has a superior stiffness and strength in many heavy duty friction generating part life, and increased performance is required at temperatures of 250 F.

APPLICATIONS:

Nylon 5651 typical applications are as followed: pillow blocks, trunnion bearings, rope sheaves, pulleys, sprockets, slipper pads, and dryer bushings and wear pads.

MECHANICAL PROPERTIES:

Property
Specified
Units
Method
Tensile Strength
34,500
psi
ASTM D638
Elongation
-1
%
ASTM D638
Tensile Modulus
565,000
psi
ASTM D638
Compressive Strength
71,000
psi
ASTM D695
Flexural Strength
125,000
psi
ASMT D790
Flexural Modulus
7,000,000
psi
ASTM D790
Notched Impact
18.4
ft/lb/in
ASTM D256
Hardness
.80 – .84
shore-D
Coefficient of Friction
13 – .20
dry vs steel
Service Temperature
250
(F)
Thermal Expansion
5.5 x 10` 5th
in/in/F
ASTM D696
Wear Factor
120
k
K (in3/min/ft/lb/hr)
Specific Gravity
1.15
g/cm3
ASTM D792
Water Absorption
.40
24hours-%
ASTM D570
Dielectric
500 – 600
volts/mil
ASTM D149
Heat Deflection Temperature
451
(F)
ASTM D639
Density
1.45
g/cc

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes no liability in connection with any use of this information.

Top