Fluorolon 5060 is a high performance 40% glass reinforced grade PPS high temperature engineering plastic. It is an excellent material for a wide variety of applications where chemical, thermal and combustion properties are critical. This materaial has excellent chemical resistance to most all chemicals.with high modulus and low creep properties

APPLICATIONS:

PPS 5060 is ideal for sturctural loads under static conditions.

Property
Specified
Units
Method
Tensile Strength
7600
psi
ASTM D638
Elongation
2
%
ASTM D638
Tensile Modulus>
psi
ASTM D638
Compressive Strength
23,800
psi
ASTM D695
Flexural Strength
23,000
psi
ASMT D790
Flexural Modulus
840,000
psi
ASTM D790
Notched Impact
1
ft/lb/in
ASTM D256
Hardness
86
Shore-D
ASTM D785
Coefficient of Friction
48
Dynamic
dry v steel
Service Temperature Continuous
450
F
Thermal Expansion
24 x 10^6th
in/in/F
ASTM-D696
Wear Factor
16
uin/min
ASTM-D3702
Specific Gravity
1.67
g/cm3
ASTM D792
Water Absorption
.03
24hours-%
ASTM D570
Dielectric
kv/cm
ASTM D149
Flammability
self-ext
ASTM D639
Resistance to oils, fuels, solvents
excellent

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes no liability in connection with any use of this information.