Considering Reshoring/Near-Shoring?

100 Years

Of Experience

  • Facebook
  • LinkedIn

Considering Reshoring/Near-Shoring?

100 Years

Of Experience

Wear Sleeves

More about Wear Sleeves

Request a Quote

Wear Sleeves

Wear SleevesDynamic shaft seals can experience excessive wear when there are imperfections in the shaft surface. It isn’t always feasible to pull the shaft and recondition the surface finish. It can also be too expensive to replace the entire shaft when it’s only a small section that is causing problems. Another option might be to customize a seal to work with the shaft, but that can be just as problematic. A wear sleeve is an alternative solution that can either cover up shaft imperfections or protect the shaft itself from wear. There is no need to replace or resurface the shaft, they are easy to install, and they can significantly extend the life of seals.

  • 4140 Steel
  • AR400
  • 300 Series Stainless Steel
  • 0-1 Tool Steel
  • 17-4 PH
  • Bronze

Ceramic

    • Low volume
    • Abrasive media
    • No lube required

Ion Nitride

    • Low volume
    • Medium Corrosion resistance
    • Inexpensive vs. TDC
    • No grinding after IN

Thin Dense Chrome (TDC)

    • Case hardened
    • .003″ deep
    • Inexpensive vs. hard chrome

Hard Chrome

    • Good corrosion resistance
Top
Request a QuoteRequest a Quote Today!