Fluorolon Virgin PTFE 1050 is reinforced, 15% Glass/ 5% Molybdenum Disulfide.
The improves the wear properties, reduces extrusion. The material has the ability to run under dry or wet conditions making i tan ideal bearing and seal material. The material is excellent in dry gas applications.
G/MOS2 1050 has excellent Chemicals compatibility. This material is compatible with most fluids and gases, except some acids, such as sulfiric, mitric and hydrofloric acids.
G/MOS2 1050 is not FDA compliant
The mechanical properties of G/MOS2 1050 at ambient temperaturas are:
Tensile Strength ASTM D638 2200 psi (155 kg/cm2)
Elongation ASTM D638 175%
Service Temperature Range ( F)
-250 to 550
Advantages of PTFE
-Good extrusion resistance -Improved creep resistance
-Moderate wear resistance -Improved stability at high temperatures
This information corresponds to our current information on the subject. It is offered solely yo provide suggestions for your own experimentation. It is not intended, however, to subtitule for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual endU use conditions, Advanced EMC Technologies makes no warranties.