Fluorolon Virgin PTFE 1050 is reinforced ,15% Glass/ 5% Molybdenum Disulfide. The
improves the wear properties, reduces extrusion. The material has the ability to run under
dry or wet conditions making it an ideal bearing and seal material. The material is excellent
in dry gas applications.

APPLICATIONS:

Fluorolon 1050 is used primarily for high pressure seals, seats, bearings best in vacuum/
inert gas sealing not for use in rotary. Can be abrasive

MECHANICAL PROPERTIES:

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to
substitute for any testing you may need to conduct to determine for yourself the suitability
of our products for your particular purposes. Since we cannot anticipate all variations in
actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes
no liability in connection with any use of this information.