Metal U-Ring Seals
METAL RING SEALS -
HIGH PERFORMANCE SEALING SOLUTIONS FOR THE EXTREME CONDITIONS
The Metal U-Ring Seal from Advanced EMC Technologies is designed for static and low-cycle dynamic shaft sealing applications. With a unique U-shaped substrate, this seal provides excellent performance in extreme environments, including high temperatures, cryogenic conditions, and high-pressure systems. The Metal U-Ring is pressure-energized for axial sealing, offering good spring-back performance with low bolting load requirements.
Full Properties Sheet
| Temperature |
|
||||
|---|---|---|---|---|---|
| Density | 0.85 g/cm³ ± 0.10 g/cm³ | ||||
| Pressure | 1500 bar (21,755 psi) | ||||
| pH | 0-14 | ||||
| Tensile Strength | >20 MPa | ||||
| Stress Retention | 15 MPa | ||||
| Specific Leakage Rate | 1E-10 Pa·m³/s | ||||
| Compressibility – ASTM F 36 M | 45% | ||||
| Recovery – ASTM F 36 M | 14% |
Applicable Industries
| Industries | Applications |
|
|
|
|
|
|
The Spring-Energized Metal U-Ring Seal from Advanced EMC Technologies is engineered for static and low-cycle dynamic sealing applications. This advanced seal combines a metallic U-shaped substrate with an internal spring, allowing it to bear higher loads and ensure reliable sealing even on rough surfaces. Designed for extreme conditions, the Spring-Energized Metal U-Ring Seal provides superior performance in high-temperature, high-pressure, and vacuum environments.
Full Properties Sheet
| Temperature |
|
||||
|---|---|---|---|---|---|
| Density | 0.85 g/cm³ ± 0.10 g/cm³ | ||||
| Pressure | 1500 bar (21,755 psi) | ||||
| pH | 0-14 | ||||
| Tensile Strength | >20 MPa | ||||
| Stress Retention | 15 MPa | ||||
| Specific Leakage Rate | 1E-10 Pa·m³/s | ||||
| Compressibility – ASTM F 36 M | 45% | ||||
| Recovery – ASTM F 36 M | 14% |
Applicable Industries
| Industries | Applications |
|
|
|
|
|
|