FLUOROLON PEEK 3015 BG

Share
by admin

PEEK 3015 BG Carbon/PTFE/Graphite is a high performance, high temperature polymer. It is an excellent material for a wide variety bearing applications offering high load, low coefficient of friction for high temperature bearing applications

APPLICATIONS:

PEEK 3015 BG Carbon/PTFE/Graphite is designed for higher load bearing applications with medium to higher FPM.

Property
Specified
Units
Method
Tensile Strength
20,445
psi
ASTM D638
Elongation
2.5
%
ASTM D638
Tensile Modulus
–
psi
ASTM D638
Compressive Strength
21,750
psi
ASTM D695
Flexural Strength
30,450
psi
ASMT D790
Flexural Modulus
1,174,500
psi
ASTM D790
Notched Impact
1.16
ft/lb/in
ASTM D256
Hardness
90
shore-D
ASTM D785
Coefficient of Friction
.24
–
dry vs steel
Service Temperature
500
(F)
–
Thermal Expansion
1.2 x 10` 5th
in/in/F
ASTM D696
Wear Factor
–
k
K (in3/min/ft/lb/hr)
Specific Gravity
1.14
g/cm3
ASTM D792
Water Absorption
.06
24hours-%
ASTM D570
Dielectric
190
kv/cm
ASTM D149
Flammability
self – ext
–
ASTM D639
Resistance to oils, fuels, solvents
fair
–
–

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes no liability in connection with any use of this information.