Sellos energizados por resortes de Teflón PTFE para el mercado mexicano

Calidad igual a Omniseal, Parker Flexiseal y Bal Seal

• Ingeniería y soporte de diseño
• Tiempos de respuesta más rápidos
• Precios más bajos y más competitivos

Los sellos de PTFE activados por resorte ofrecen sellado estático y dinámico de temperatura extrema, alta presión, químicamente inerte para las aplicaciones más exigentes. Nuestra delgada y flexible cubierta de sellado de PTFE, diseñada para ser resistente, utiliza un resorte diseñado para aplicar presión hacia el exterior al elemento de sellado, a bajas presiones. Se crea un sello altamente eficiente, a medida que la presión del sistema aumenta lo suficiente para tomar el relevo del resorte y enganchar el eje o el orificio. El resorte o el ensamble del sello energizado proporciona resistencia permanente a la cubierta del sello y compensa el desgaste de la cubierta, la desalineación del hardware y la excentricidad. El material de la cubierta es crítico en el diseño, para asegurar un rendimiento de sellado adecuado. Ofrecemos compuestos de PTFE específicos para la aplicación, es decir, sellos de alta PV, sellos criogénicos, sellos de alta temperatura y aleaciones de sello de PTFE con rellenos como el grafito de PTFE, Poliamida de PTFE, carbono de PTFE, PTFE de PPS, y Rulon L, Rulon J y Rulon equivalentes.

Benefits of Teflon

Applications

Polymer Seal Jacket Materials

Fluorolon	Description	Application	Temp. Range F.	Extrusion Resistance	Friction Rating
1000	Virgin PTFE	Light duty service, lowest friction, FDA approved, Excellent for cryogenic and low molecular weight gas service.	-320 to 450	Lowest	Lowest
1034	Carbon/Graphite PTFE	Excellent resistance to heat and wear. Recommended for dry or semi-dry applications. Good in liquids and steam.	-320 to 500	Moderate	Low
1017	Moly/Filled PTFE	Excellent in dry gas with better wear resistance than Fluorolon 1000.	-320 to 525	Very High	Low
1050	Glass/Moly PTFE	Excellent wear and heat resistance. High pressure applications, good in hydraulic,steam and water. Abrasive in rotary service against soft metals.	-250 to 550	Very High	Moderate
1060	Polyimide/Filled PTFE	Excellent in dry service with low wear rate in vacuum and inert gases. Very low abrasion to dynamic mating surfaces.	-450 to 500	Very High	Low
5000	UH/Polymer PE	Excellent wear and extrusion resistance in aqueous media. FDA Approved. Has higher friction than PTFE compounds.	-320 to 175	Very High	High
1028	60% Bronze / filled PTFE	Excellent pressure capability even at high temperatures. Excellent at very high rotary speeds with low pressure	-320 to 450	Lowest	Moderate
2800	PCTFE / KEL F	Best grade for cryogenic applications. Static and slow dynamic.	-350 to 300	Lowest	High

Typical Seal Geometries: Cantilever and Helical Designs

General Purpose	Rod/Piston Seal	Face Seal	Flanged Rotary

Spring Energizers For Spring Loaded Seals

Fluorolon	Description	Application
S301	301 Stainless Steel	General purpose for service to 550 F. Not recommended for highly corrosive media.
HST	Hastelloy C-276	Recommended for highly corrosive media.
E	Elgiloy	For service in salt water,severe media or milder corrosives over 500 F.

Factors Influencing Seal Performance

Several factors effect seal performance and must be addressed in the design stage to ensure maximum reliability of Fluorolon seals.

• Hardware Preparation: Surface Finish and Hardness
• Spring Energizer
• Polymer Jacket
• Operating Conditions
• Lubrication
• Frictional Considerations
• Spring Loaded vs Deflection
• Extrusion Gap / Radial Clearance

Materials Spec Sheets | Seal Data Sheet | Standard Seal and Gland Sizes | PTFE Seals video