FLUOROLON PPS 5051

Share
by admin

5051 a proprietary bearing grade PPS Reinforced with carbon fibers and internal lubricates this resin is a high performance, high temperature bearing grade engineering plastic. It is an excellent material for a wide variety of applications where chemical, thermal and combustion properties are critical.

APPLICATIONS:

PPS 5051 is ideal for pump bodies High Performance Liquid Chromatography (HPLC)
equipment, seats and bearing, seals in valves and fluid handling equipment. .

Property
Specified
Units
Method
Tensile Strength
8,000
psi
ASTM D638
Elongation
1
%
ASTM D638
Tensile Modulus
980,000
psi
ASTM D638
Compressive Strength
15,000
psi
ASTM D695
Flexural Strength
16,000
psi
ASMT D790
Flexural Modulus
820,000
psi
ASTM D790
Notched Impact
1
ft-lb/in
ASTM D256
Hardness
86
Shore-D
ASTM D785
Coefficient of Friction
.25
Dynamic
dry v steel
Service Temperature Continuous
420
F
–
Thermal Expansion
1.9 x 10`5th
in/in/f
ASTM D696
Wear Factor
800
K
(in3/min/ft/lb/hr)
Specific Gravity
1.51
g/cm3
ASTM D792
Water Absorption
.02
24hours-%
ASTM D570
Dielectric
–
kv/cm
ASTM D149
Flammability
self-ext
–
ASTM D639
Resistance to oils, fuels, solvents
excellent
–
–

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes no liability in connection with any use of this information.