Fluorolon PCTFE 2800 is a fluoropolymer, (Kel- F) was the prior trade name.
This is an excellent material for cryogenic applications medium heat
resistance with high resistance to Chemicals agents and solvents.

Chemical Compatibility
Cryogenic and Chemicals processing components, nuclear service/high
radiation exposure, liquid oxygen and liquid nitrogen valve linings.

FDA Compliance
Fluorolon PCTFE 2800 is FDA compliant.

Mechanical Properties
The mechanical properties of ALLOY 1034 at ambient temperatures are:
Tensile Strength ASTM D638 5300 psi (175 kg/cm2)
Elongation ASTM D638 150%

Translucent white

Service Temperature Range ( F)
-400 to +380

Advantages of PTFE
-Dimensionally stable, rigid, resistant to cold flow.
– Very low gas permeation and outgassing.
-Near zero moisture absorption.
-Low deformation under load
-Radiation resistance

Other information
This information corresponds to our current information on the subject. It is
offered solely yo provide suggestions for your own experimentation. It is not
intended, however, to substitute for any testing you may need to conduct to
determine for yourself the suitability of our products for your particular
purposes. Since we cannot anticipate all variations in actual end- use
conditions, Advanced EMC Technologies makes no warranties.

Leave a Reply

Your email address will not be published. Required fields are marked *