Fluorolon Virgin PTFE 1000 is a high molecular weight polymer, one of the most
versatile plastic materials known and useful for a large range of products for applications
excluded to other materials. The characteristics are: high heat resistance, high resistance to
chemical agents and solvents, high dielectric properties, low friction, and non-toxicity.

APPLICATIONS:

Virgin PTFE 1000 is used primarily for seals, seats, bearings, and insulators.

MECHANICAL PROPERTIES:

Property
Specified
Units
Method
Specified Gravity
2.14 – 2.20
gr/cc
ASTM D792
Tensile Strength
1500 – 3500
psi
ASTM D638
Elongation
250 – 350
%
ASTM D638
Hardness
50 – 60
Durometer D
ASTM D1706
Deformation 78 F@ 2000psi/24h
14-16
%
ASMT D621
Water Absorption
0.001
%
ASTM D570
Coefficient of Friction
0.04
*F
*3
Dielectric Constant
2.00
ASTM D150
Dielectric Strength
1000
volts
ASTM D257
Coefficient of Thermal Expansion
5.5 x 10^5th
in/in/ft
ASTM D696
Compressive Strength
1100
psi
ASTM D695-57
Max Service Temp Continuous
500
*F

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to
substitute for any testing you may need to conduct to determine for yourself the suitability
of our products for your particular purposes. Since we cannot anticipate all variations in
actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes
no liability in connection with any use of this information.