Fluorolon Virgin PTFE 1080 is a second-generation modified PTFE that maintains the exceptional chemical and heat resistance properties of first-generation PTFE, but with a significantly lower melt viscosity giving better particle fusion during sintering and smoother surfaces.
APPLICATIONS:
Virgin PTFE modified 1080 is used primarily for seals, seats, bearings, and insulators.
MECHANICAL PROPERTIES:
Property
Specified
Units
Method
Specfic Gravity
2.16
gr/cc
ASTM D4894/4895
Tensile Strength
6240
psi
ASTM D4894/4895
Hardness
59
Shore D
ASTM-D1700
Elongation
250 – 350
%
ASTM D4894
Modulus of Elasticity
94.3
ksi
–
Electrical Resistivity
1E+14
ohm–cm
IEC 60093
Dielectric Strength
2670
kV/in
IEC 60243-01
Surface Resistance
1E+17
ohm
IEC60093
Coefficient of Thermal Expansion
5.4x 10.3
In/in/F
ASTM-D696
Maximum Service Temperature
500
*F
–
This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes no liability in connection with any use of this information.