FLUOROLON PPS 5065

Share
by admin

Bearing Grade PPS is a high performance, high temperature engineering plastic. It is an excellent material for a wide variety of applications where chemical, thermal and combustion properties are critical.

APPLICATIONS:

PPS 5065 is ideal for pump bodies High Performance Liquid Chromatography (HPLC) equipment, seats and bearing, seals in valves and fluid handling equipment. Surgical Devices long and short term implants.

Property
Specified
Units
Method
Tensile Strength
15,000
psi
ASTM D638
Elongation
0.5
%
ASTM D638
Tensile Modulus
–
psi
ASTM D638
Compressive Strength
18,000
psi
ASTM D695
Flexural Strength
25,600
psi
ASMT D790
Flexural Modulus
650,000
psi
ASTM D790
Notched Impact
1
ft/lb/in
ASTM D256
Hardness
85
Shore-D
ASTM D785
Coefficient of Friction
.34
Dynamic
dry v steel
Service Temperature Continuous
480
F
–
Thermal Expansion
2.6 x 10`5th
um/m/c
ASTM D696
Wear Factor
–
k
K (in3/min/ft/lb/hr
Specific Gravity
1.32
g/cm3
ASTM D792
Water Absorption
.5
24hours-%
ASTM D570
Dielectric
190
kv/cm
ASTM D149
Flammability
self-ext
–
ASTM D639
Resistance to oils, fuels, solvents
excellent
–
–

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes no liability in connection with any use of this information.