Engineers are replacing metal bearings too often or are dealing with corrosion, weight, or lubrication failures. PEEK is a high-performance polymer alternative that is changing bearing design. In this article, we look at what PEEK is, why it performs well in many bearing applications, and where it genuinely makes sense to use it.
What Is PEEK and Why Does It Matter for Bearings?
PEEK (Polyether ether ketone) is a semi-crystalline thermoplastic that has proven an excellent solution to many bearing problems. It offers a high strength-to-weight ratio, excellent chemical resistance, a low coefficient of friction, and thermal stability up to 250°C continuous. This combination of properties leads to effective bearing performance, offering PEEK an advantage over both metal and many standard polymer solutions.
High Load Capacity
The standard performance-bearing metric is the PV rating (pressure × velocity). If we look at the PV ratings of commonly used polymer bearing materials, we see that PTFE is severely limited despite its low friction, and nylon and acetal do not do much better. Unfilled PEEK has the best PV ratio, and when filled with carbon fiber, it has a significantly higher PV rating than other engineering polymers. This alone is an excellent reason to consider using PEEK in bearing applications. And note that filled PEEK grades are typically the main choice for demanding applications, while unfilled PEEK is more commonly used where chemical purity or machineability is the priority.
Low Wear Performance
One of the most interesting features of PEEK as a bearing material is its wear resistance, which is critical for many applications. PEEK’s molecular structure resists abrasion under dynamic loading, and it offers excellent performance in dry-running applications because it is self-lubricating, offering an excellent option when lubricants are discouraged or prohibited. Bearing-grade PEEK filled with carbon or graphite further enhances wear performance by significantly reducing wear rates. The low wear performance of PEEK bearings also leads to reduced downtime and longer maintenance intervals.
Where PEEK Bearings Make Sense
PEEK has excellent properties, but they are not an ideal fit for all bearing applications. PEEK bearings are commonly used for applications such as the following:
- Medical devices and surgical equipment, where biocompatibility and sterilization resistance prove critical
- Food and beverage processing, where the self-lubricating property reduces contamination risks
- Aerospace and defense, where the high strength-to-weight ratio leads to weight savings, reduced energy requirements, and SWaP-friendly designs
- Chemical processing, where resistance to acids, solvents, and aggressive media exposure is necessary
- Semiconductor and cleanroom environments, where PEEK exhibits no outgassing
There are areas where PEEK is not recommended, however. It should not be used in ultra-high load static applications, where steel still dominates. In addition, it’s not well-suited to very high-temperature environments, which are likely beyond PEEK’s thermal ceiling. Finally, PEEK is not a good option for budget-sensitive, low-performance applications where cheaper plastics work well.
Conclusion
PEEK bearings are not a universal replacement for other materials, but rather a viable option for demanding operating environments where their unique properties justify the cost. If you are looking for a sealing solution that sounds like a great application for PEEK, contact the sealing experts here at Advanced EMC and put their knowledge to work for you.